Gallery 33 builds

Ideas, then the model.

Every one of these started as a standard HSA model and was modified for the room it went into. Take the idea, then ask for the standard model with your own changes — that is how most of our work is ordered. A previous custom can be built again, but the standard model with your modifications is usually the better route.

01

The builds — 33

From the HSA library

Every published build is here, with 107 photographs across them. 0 carry a recorded source model in the library today, so the rest are shown as pictures and a request rather than a link to a model page. Each “Request this build” opens the estimate with that build already in it — you add only your name and contact.

HH-Custom
HH-Custom, view 1 HH-Custom, view 2 HH-Custom, view 3
Custom build

HH-Custom

This beauty is pictured in Warm Cherry and is based on a rolltop custom. This can be setup in unlimited combinations. Images used show variations of the combinations available in this design.

Warm Cherry finish
Request this build →
A-Custom
A-Custom, view 1 A-Custom, view 2 A-Custom, view 3 A-Custom, view 4
Custom build

A-Custom

A special modification to a pair of our Standard Rolltops. The desks are bolted together into one unit and have the undermounted racks "mirrored". A special pass-by is created on the sides between the desks to enable extra leg and knee room for the operator. This is a "customization" by just applying our RACKLEFT and PASSTHRU options to a pair of Standard Rolltops to get a nice and compact separated Audio/Video control center.

RACKLEFT optionPASSTHRU optionMirrored undermount racks
Request this build →
B-Custom
Custom build

B-Custom

Yes, you can add the Galvanized Steel Package Option for even more strength and security on our Desktop version rolltops! Here is a Desktop Extended (DTEXT-II) with the SS3D package which includes the Galvanized Steel tambours, Extra Thick Sidewalls and two of the ILS heavy-duty locks.

SS3D packageGalvanized steel tamboursExtra thick sidewallsILS heavy-duty locks
Request this build →
BB-Custom
Custom build

BB-Custom

Here we take our Rolltop Custom Quad desk and modify it for a RACKCTR option and remove both rolltop tambours for a simpler but very spacious AV Control Desk. A special double-scooped RollBase with our 4" heavy-duty locking casters provide ease of rolling and positioning and nearly 6" of additional height for comfortable operation.

RACKCTR optionDouble-scooped RollBase4" locking casters
Request this build →
C-Custom
Custom build

C-Custom

A nice example of a combination of standard and custom pieces. Here, an Inspire Super Extended desk has been modified for a special "L"-shaped corner AV Control Center with the addition of a custom corner unit cabinet with cable pass-throughs and storage. The corner unit was made accessible from both back sides and each rack back ventilated as well.

Inspire Super Extended baseCustom corner unitCable pass-throughsVentilated rack backs
Request this build →
CC-Custom
CC-Custom, view 1 CC-Custom, view 2
Custom build

CC-Custom

A beautiful and durable all high-pressure laminate custom storage credenza with 3 locking doors. 7' wide!

High-pressure laminate3 locking doors7 ft wide
Request this build →
Custom #23055
Custom #23055, view 1 Custom #23055, view 2 Custom #23055, view 3 Custom #23055, view 4 Custom #23055, view 5 Custom #23055, view 6
Custom build

Custom #23055

Custom L-shaped desk. Pictured in Teak. Based on our popular Inspire Series products. This unique desk provides corner solutions for Left, Right, or U shaped work areas.

Inspire Series baseTeak finishL / U corner layout
Request this build →
Custom Desk # 24017
Custom Desk # 24017, view 1 Custom Desk # 24017, view 2 Custom Desk # 24017, view 3 Custom Desk # 24017, view 4 Custom Desk # 24017, view 5 Custom Desk # 24017, view 6
Custom build

Custom Desk # 24017

Custom Desk # 24017 Based off our Open Desk Series. This beauty offers a huge working surface with a rack in the middle. Pictured in Ebony Black

Open Desk Series baseCenter rackEbony Black finish
Request this build →
D-Custom
D-Custom, view 1 D-Custom, view 2 D-Custom, view 3
Custom build

D-Custom

Yes! You can "Mix & Match"! Just stay within the same "families" of desks as we did here with a Standard Rolltop (and adding a PLUS4 height option to clear a tall audio console) paired with a High Rise Standard Rolltop (with a NOUPPER option to house video monitors). Both desks are 34" front-to-back since they are in the "Standard" family of dimensions. A PASSTHRU option between the securely bolted-together mated internal sidewalls of the two desks provides comfortable legroom.

PLUS4 height optionNOUPPER optionMix-and-match pair
Request this build →
DD-Custom
DD-Custom, view 1 DD-Custom, view 2 DD-Custom, view 3 DD-Custom, view 4
Custom build

DD-Custom

Based On Our STDRT-II Design Features: Dual 12 RU Lower Racks, Galvanized Steel Rolltop Doors with Institutional Lock, RollBase with six full lock 4" casters Shown In Walnut (WA) Finish

STDRT-II baseDual 12RU lower racksGalvanized steel tamboursInstitutional lockRollBase + 4" castersWalnut finish
Request this build →
E-Custom
E-Custom, view 1 E-Custom, view 2 E-Custom, view 3 E-Custom, view 4
Custom build

E-Custom

Triple Desk work center system based on our Inspire Extended Series Style (custom design #11010). Featuring 3 desk areas at custom width, each with its own locking rolltop tambour and PASSTHRU options in the knee-wells for easy chair and leg movement between desks. The twin 17RU equipment racks with special ventilated and locking side access doors on the racks enable equipment and wiring access in the limited space the work center operates within.

Inspire Extended baseCustom widthPASSTHRU optionsLocking rolltop per desk
Request this build →
EE-Custom
EE-Custom, view 1 EE-Custom, view 2 EE-Custom, view 3 EE-Custom, view 4
Custom build

EE-Custom

This is a three section design, specially designed to have each section have a specific purpose. The left desk is the audio station, the center is for lighting, and the right position is for the director. Every custom HSA Design is made to fit your specific needs.

Made to orderQuoted to spec
Request this build →
F-Custom
F-Custom, view 1 F-Custom, view 2 F-Custom, view 3
Custom build

F-Custom

Dual configuration based upon an Inspire High Rise Standard with an additional desk body (two desk bodies and shared center rack body). Used for FOH audio control/lighting control. Photo on left shows desks and racks closed while right photo shows all open. Note the "NOUPPER" option was applied for extra clearance to use video monitors and/or large/tall meter-bridged mix consoles.

Inspire High Rise Standard baseTwo desk bodiesShared center rack
Request this build →
G-Custom
Custom build

G-Custom

To the left is a pair of High Rise Standard Rolltops which will be used for a combination Audio & Video mix station. They are mirrored, with the center pass-by option for legroom clearance. The right desk was built without the Upper SlideOut rack bay to enable an easy fit for up to a 16"+ tall LCD monitor with no other modification.

Pair of High Rise StandardCenter pass-by optionNOUPPER built
Request this build →
H-Custom
Custom build

H-Custom

Here is an Inspire High Rise Extended variation with a special video turret style rack enclosed in the main desk body. It provided convenient mounting for a switcher and mini-monitors while leaving ample desktop space.

Inspire High Rise ExtendedVideo turret rackSwitcher + mini-monitors
Request this build →
HH-Custom - Alternate Build
HH-Custom - Alternate Build, view 1 HH-Custom - Alternate Build, view 2 HH-Custom - Alternate Build, view 3
Custom build

HH-Custom - Alternate Build

This beauty is pictured in Warm Cherry and is based on a rolltop custom. This can be setup in unlimited combinations. Images used show variations of the combinations available in this design.

Warm Cherry finishRolltop custom base
Request this build →
I-Custom
I-Custom, view 1 I-Custom, view 2 I-Custom, view 3 I-Custom, view 4
Custom build

I-Custom

Another great example of standard option customizations to create a special Inspire Series multi-desk workstation. The desks and racks are bolted together into one unit after installation. On the left is an Inspire Standard Desk body (44" internal left-to-right clearance) with an INPLUS4 extra height option (adds 4 extra inches for a nominal internal height clearance of 11.625"). It also features our VIDEOBAY option applied to the entire rear section of the table giving a downward adjustable height platform for LCD monitors. Next is a modified Standard Rolltop with a PLUS4 option (and Modesty Panel option to match the Inspire Desk). This desk is specially built to the left-to-right width of our Extended Rolltop model desk (for the wider 56" internal clearance) and includes its 10RU undermounted rack. Finally, to the right side is our Inspire Standard Rack which includes the INPLUS4 option to bring its capacity up to 18RU of rack space.

Inspire Standard / High Rise bodiesBolted-together workstation
Request this build →
GG-Custom
GG-Custom, view 1 GG-Custom, view 2 GG-Custom, view 3
Custom build

GG-Custom

Shown here is our INSSTD-II to the left and Our INSHRS-D on the right. Both with our Aluminum Rolltops, Institutional Locks and extra thick wall construction. The finish chosen for this project was (AC) Antique Cherry. Externally 113.5"W x 34"D x 44.75"H

INSSTD-II + INSHRS-DAluminum rolltopsInstitutional locksAntique Cherry finish
Request this build →
J-Custom
J-Custom, view 1 J-Custom, view 2 J-Custom, view 3 J-Custom, view 4
Custom build

J-Custom

J-Custom Spec This INSSTD-II (The Inspire Standard Rolltop) shares its siderack with another INSSTD-D desk body. An INPLUS5 and PLUS5 extra height option applied across the three pieces plus an "all across the rear" VIDEOBAY option gives plenty of monitor space especially if used with our MONARM option system.

INSSTD-II baseShared siderackINPLUS5 + PLUS5 heightVIDEOBAY across the rear
Request this build →
K-Custom
K-Custom, view 1 K-Custom, view 2 K-Custom, view 3 K-Custom, view 4
Custom build

K-Custom

Another great control center based on an Inspire Rolltop Custom (model INSRTC-II) but just using only one of its sideracks and adding a customized INSHRE-D desk body built to 44" (which is the normal width of our High Rise Standard desk body). An UPPER2X3 rack option in the INSRTC desk body gives a nice balance of video monitor clearance and some eye-level rack space (shown in photos with the included modesty panels removed).

INSRTC-II baseSingle siderackINSHRE-D at 44" width
Request this build →
L-Custom
L-Custom, view 1 L-Custom, view 2 L-Custom, view 3
Custom build

L-Custom

This customized Inspire Standard was the basis for a compact, portable control center. An INPLUS4 option added extra internal height clearance on the worksurface which included the Video Bay option. Our 10 space undermounted rack was added for increased rack mount capacity and both racks moved to the left-hand side. Be sure to see our RollBases on our Options page featuring great access and legroom clearance.

Inspire Standard baseINPLUS4 heightVideo Bay option10-space undermounted rack
Request this build →
M-Custom
M-Custom, view 1 M-Custom, view 2 M-Custom, view 3
Custom build

M-Custom

Just to show its versatility, here's one of our Inspire HRSTD desk bodies (w/NOUPPER option) with the addition of the FOLDDWNR (folding shelf) option added. Even our large Rolltop Custom Quad (RTQUAD-II) desk can benefit. Shown in the last photo with a UPPER1X3 upper rack option and the FOLDDWNL folding shelf on its left side. That makes a great guest director or temporary recording platform when needed.

HRSTD bodyNOUPPER optionFOLDDWNR folding shelf
Request this build →
N-Custom
Custom build

N-Custom

Here is a variation on the High Rise Extended Rolltop modified to hold a computer CPU next to the rack mounted electronics. Removing the Upper SlideOut Rack Unit gives clearance for a computer monitor. Shown with optional RollBase.

High Rise ExtendedComputer CPU slotOptional RollBase
Request this build →
O-Custom
O-Custom, view 1 O-Custom, view 2 O-Custom, view 3 O-Custom, view 4
Custom build

O-Custom

This Standard Rolltop (STDRT-II) has been customized to use the "kneewell" area as a second, rolltop-secured storage compartment! Also a slight modification to the RollBase. On this version, removable panels on both the 10RU rack and the compartment are offset from the desk's rear. A Modesty Panel (MODSTD) could be used to create a second compartment all across the back if needed.

STDRT-II baseRolltop-secured kneewell storageRemovable rack panels
Request this build →
P-Custom
P-Custom, view 1 P-Custom, view 2 P-Custom, view 3
Custom build

P-Custom

Here's a special option that can be added to Super Extendeds, Rolltop Customs and Rolltop Custom Quad desk bodies: A triple undermounted rack system! Shown here on a Super Extended body that has been lifted to a 28.75" high table surface and then lifted further with an eight-caster RollBase for easy mobility.

Triple undermounted rack system28.75" high table surface
Request this build →
Q-Custom
Custom build

Q-Custom

To the right is a custom Inspire Desk System featuring 3 inline rack systems, corner connector and Super Extended format desk. Corner connector featured locking rear door for cable access and additional storage.

Inspire Desk System3 inline rack systemsCorner connectorLocking rear door
Request this build →
R-Custom
R-Custom, view 1 R-Custom, view 2 R-Custom, view 3 R-Custom, view 4
Custom build

R-Custom

This spacious control center is based on the Inspire Quad. By positioning its two independent INS22RK racks to the end, and adding a slim, long sidedesk custom worktop, we create a very versatile audio/video/lighting control corner workstation. This design provides a total of 56RU rack space (44 in the sideracks and 12 in the QUAD Body's Upper SlideOut Rack Bay) and is fully finished and modesty-paneled on the audience side for beautiful aesthetic presence.

Inspire Quad baseTwo INS22RK racksLong sideless custom worktop
Request this build →
S-Custom
S-Custom, view 1 S-Custom, view 2 S-Custom, view 3
Custom build

S-Custom

A special "Stand-up" version of our Rolltop Custom Quad (also with the NOUPPER and a RACKCTR option applied). The extra height table surface positions mixing consoles, controllers, computers and monitors at a comfortable height while standing at the desk or sitting on taller drafting chairs. Great for those "line of sight" problem situations.

Stand-up Rolltop Custom QuadNOUPPER optionRACKCTR option
Request this build →
T-Custom
T-Custom, view 1 T-Custom, view 2 T-Custom, view 3 T-Custom, view 4
Custom build

T-Custom

Two desk bodies share a customized center enclosure for a popular style of pullout rotational rack! Maple finish with Matte Black high-pressure laminate on the work surfaces and heavy-duty ILS lock system securing our special Galvanized Steel rolltop tambours. Shown above with rack pulled forward.

Inspire High Rise Standard25" vertical upper bayLarge video monitor housing
Request this build →
U-Custom
U-Custom, view 1 U-Custom, view 2 U-Custom, view 3
Custom build

U-Custom

Based on our Inspire Rolltop Custom, this modified desk features clearance for taller mix consoles, heavily ventilated rack backs and a heavy-duty RollBase with eight - 4" non-marring casters.

Inspire Rolltop Custom baseTaller mix-console clearanceVentilated rack backsRollBase + 4" casters
Request this build →
V-Custom
V-Custom, view 1 V-Custom, view 2 V-Custom, view 3
Custom build

V-Custom

With a bit of a customization, we convert a Rolltop Custom Quad (model RTQUAD-II) desk from center seating to a split configuration for two AV operators, by building its two undermounted 10RU racks in the center.

RTQUAD-II convertedSplit configurationTwo 10RU center racks
Request this build →
X-Custom
X-Custom, view 1 X-Custom, view 2 X-Custom, view 3 X-Custom, view 4
Custom build

X-Custom

This custom design is a special adaptation of our High Rise Standard Rolltop developed to house a large video monitor and related electronics. This highly modified design allows for 25 inches of vertical space inside the upper unit to securely store larger equipment. The design can be produced with or without the lower rack for additional storage space.

Super Extended bodyTriple undermounted rack system
Request this build →